Ngwakọta kemịkalụIgwe anaghị agba nchara 304
Tebụl 1.Ngwakọta kemịkalụ maka 304 igwe anaghị agba nchara alloys
| % | 304 | 304L | 304H |
| C | 0.0 - 0.07 | 0.0-0.03 | 0.04 - 0.08 |
| Mn | 0.0-2.0 | 0.0 - 2.00 | 0.0-2.0 |
| Si | 0.0 - 1.00 | 0.0 - 1.00 | 0.0-1.0 |
| P | 0.0-0.05 | 0.0-0.05 | 0.0 - 0.04 |
| S | 0.0-0.03 | 0.0-0.02 | 0.0-0.02 |
| Cr | 17.50 - 19.50 | 17.50 - 19.50 | 17.00 - 19.00 |
| Ni | 8.00 - 10.50 | 8.00 - 10.50 | 8.00 - 11.00 |
| Fe | Nhazi | Nhazi | Nhazi |
| N | 0.0-0.11 | 0.0-0.11 | 0.0-0.10 |
NjirimaraIgwe anaghị agba nchara 304
Ihe eji arụ ọrụIgwe anaghị agba nchara 304
Tebụl 2a.Ihe eji arụ ọrụ maka alloys igwe anaghị agba nchara 304 - mpempe akwụkwọ ruru 8 mm
| Ọkwa | 304 | 304L | 304H |
| Ike tensile (MPa) | 540-750 | 520-700 | - |
| Ihe mgbakasị ahụ (MPa) | 230 Min | 220 Min | - |
| Elongation A50 mm | 45 min% | 45 min% | - |
Tebụl 2b. Ihe eji arụ ọrụ maka alloys igwe anaghị agba nchara 304 - efere sitere na 8 - 75 mm
| Ọkwa | 304 | 304L | 304H |
| Ike tensile (MPa) | 520-720 | 500-700 | - |
| Ihe mgbakasị ahụ (MPa) | 210 Min | Nkeji 200 | - |
| Elongation A5 | 45 min% | 45 min% | - |
Tebụl 2c.Ihe eji arụ ọrụ maka alloys igwe anaghị agba nchara 304 - mmanya na ngalaba ruo 160 mm dayameta / ọkpụrụkpụ
| Ọkwa | 304 | 304L | 304H |
| Ike tensile (MPa) | 500-700 | 500-700 | 500-700 |
| Ihe mgbakasị ahụ (MPa) | 190 | 175 Min | 185 Min |
| Elongation A50 mm | 45 min% | 45 min% | 40 min% |
| Brinell siri ike | 215 Max HB | 215 Max HB | - |
Njirimara anụ ahụIgwe anaghị agba nchara 304
Tebụl 3.Njirimara anụ ahụ maka 304 igwe anaghị agba nchara alloys
| Ngwongwo | Uru |
| Njupụta | 8.00 g / cm3 |
| Ebe Na-agbaze | 1450 Celsius C |
| Modul nke Elasticity | 193 GPA |
| Eletriki Resistivity | 0.72 x 10-6 Ω.m |
| Nrụpụta okpomọkụ | 16.2 W/mK |
| Mgbasawanye okpomọkụ | 17.2 x 10-6/K |
Ngwa nke Capillary Tube
A na-etinye tube capillary n'ọtụtụ ebe na ụlọ ọrụ kemịkalụ, mmanụ ala, ngwa elektrọn, ngwa, ọgwụgwọ ahụike, ikuku ikuku, ntụ oyi, akụrụngwa ahụike, ngwa kichin, ọgwụ, akụrụngwa mmiri, igwe nri, igwe ọkụ, igwe ọkụ.
- Ụlọ ọrụ ngwaọrụ ahụike: tube agịga injection, tube agịga puncture, tube ụlọ ọrụ ahụike
- Igwe ọkụ ọkụ eletrik ụlọ ọrụ, ọkpọkọ mmanụ ụlọ ọrụ
- Ngwá ọrụ tube
- Ụgbọ ala tube
- Nri ulo oru tube
Chart nha igwe anaghị agba nchara capillary Tube
OD/T 0.05 - 0.07 0.07-0.1 0.1-0.14 0.14 - 0.19 0.19 - 0.24 0.24 - 0.39 0.39 - 0.49 0.49 - 0.99 0.99 - 1.4 1.4-2.0 0.2-0.3 0.3-0.4 0.4-0,5 0.5-0,8 0.8-1.0 1.0-1.5 1.5-2.0 2.0-2.5 2.5-3.0 3.0-3.5 3.5-4.0 4.0 - 5.0 5.0-6.0 6.0-8.0 * Unit bụ Mm.
Oge nzipu: Ọgọst-17-2023